Deep Cycle 24V 100ah LiFePO4 Lithium Battery Power Supply Solar Electric Vehicles UPS with BMS
Battery Pack |
Specification |
Remark |
| Model No. |
DTP24100 |
/ |
| Battery Type |
25.6V Lithium iron phosphate battery ( LiFEPO4 ) |
/ |
| Nominal Voltage |
24V/25.6Volt |
customizable Voltage |
| Charge Cut-off (BMS protection) |
30volt±0.24volt |
/ |
| Discharge Cut-off (BMS protection) |
16.8volt±0.8volt |
/ |
| Standard / Nominal Capacity |
105Ah |
customizable |
| Approx. Weight |
36kg |
/ |
| Pack Type |
8S1P |
customizable |
| Reserve Minutes @0.2C 25ºC / |
300minutes |
/ |
| Working Voltage |
18.4volt~28.8volt |
customizable |
| Peak discharge current |
300A within 5 second |
customizable |
| Impedance |
≤15mΩ |
/ |
| Built-in Cell Model |
Primastic cell @ 100Ah |
customizable |
| Charge Temperature |
32(ºF)~122(ºF) |
/ |
| Discharge Temperature |
-4(ºF)~140(ºF) |
/ |
| Cycle life |
4000cycle (80%DOD) |
/ |
| Max Cont. discharge current |
100A |
customizable |
| Charge Method |
CC/CV |
customizable |
| Built-in BMS system |
Yes |
/ |
BMS Protection Type |
Over-Charge, Over-Dishcarge, Over-Voltage, Over-Current, Short-Circuit, Auto-reset |
/ |
| BMS Balance Type |
Active Auto-Balancing |
/ |
| Dimensions |
521*238*218 mm |
customizable |
| Connection Type |
Modular Pack welding |
/ |
BMS |
Balanced Current ( BMS ) |
20~30mA |
/ |
| Balanced voltage |
3.6volt |
/ |
| Over Charge Protection |
3.75±0.0.3v / cell |
/ |
| Release Voltage for overcharge |
3.60±0.05v |
/ |
| Rated Charge Current Protection |
100A |
customizable |
| Detection delay (over-Charge) |
1000mS |
/ |
| Short circuit trigger condition |
external load short circuit |
/ |
| Detection delay (short-circuit) |
200uS |
/ |
| Over-Discharge Cut-Off Voltage |
2.1V±0.1V / cell |
/ |
| Over-Discharge Release Voltage |
2.3V±0.1v |
/ |
| Discharge protection current |
300A (10mS) |
/ |
| Rated Discharge Current |
≤100A |
/ |
| Release condition (short circuit & over discharge) |
Disconnect Load & Charge Activation |
/ |
| Detection delay (over-discharge ) |
1000mS |
/ |
Communication interface |
Bluehost / RS485 / RS232 GPS protocol port for Choice |
customizable |
| Temperature control protection |
Discharge protection: 167 (ºF)±40 (ºF) |
/ |
| Working Temperature |
-4(ºF) ~ 176(ºF) |
/ |
| Over Heat Temperature Protection(Charge&Dishcarge) |
167(ºF)±41(ºF) |
/ |
| High temperature release value(Charge&Dishcarge) |
127.4(ºF) |
/ |
| LED Indicator |
Display Value |
Voltage / Capacity percent / Work Temperature |
customizable |
| Certificate |
CE, MSDS, CB-SG, UN38 |
customizable |
Outside Battery Box |
Outside Protection Box |
ABS Classic outer box |
customizable |
| IP Level |
IP65 |
customizable |
Aging |
Lead time |
5-15days normally |
Rely on the order quantity |
Shipment Time |
7-12days by express, 15~35days by Air, sea and rail transportation |
/ |
| Quality Assurance |
Warranty |
2 year / 24 months |
/ |
Please send us an email for more product details.!
What are the advantages of lithium batteries?
1.Good safety performance
The polymer lithium battery is made of aluminum-plastic flexible packaging, which is different from the metal casing of the liquid battery.Once the safety hazard occurs, the liquid battery is easy to explode, and the polymer battery can only be air-blasted at most.
2.Small thickness, can be made thinner
Ultra-thin, the battery can be assembled into a credit card.Ordinary liquid lithium battery adopts the method of customizing the outer casing first, and then plugging the positive and negative materials.The thickness is 3.6mm or less, there is a technical bottleneck.The polymer battery core does not have this problem, and the thickness can be less than 1mm, which meets the needs of current mobile phones.Direction.
3.Light weight
A battery using a polymer electrolyte does not require a metal shell as a protective outer package.The weight of the polymer battery is 40% lighter than the steel shell lithium battery of the same capacity specification, which is 20% lighter than the aluminum shell battery.
4.Large capacity
The polymer battery has a capacity of 10-15% higher than that of the same size steel shell battery, which is 5-10% higher than that of the aluminum shell battery.It is the first choice for color screen mobile phones and MMS mobile phones.Nowadays, the new color screen and MMS mobile phones on the market are mostly used.Polymer batteries.
5.Small internal resistance
The internal resistance of the polymer battery core is smaller than that of the general liquid battery.At present, the internal resistance of the domestic polymer battery core can even be less than 35MΩ, which greatly reduces the self-consumption of the battery and prolongs the standby time of the mobile phone.The level of integration with the international.This polymer lithium battery that supports large discharge currents is an ideal choice for remote control models and is the most promising alternative to nickel-metal hydride batteries.
6.Shape can be customized
Manufacturers are not limited to standard shapes and can be economically made to the right size.Polymer batteries can increase or decrease the thickness of batteries according to customers' needs.Develop new battery models, which are cheap, open cycle is short, and some can even be customized according to the shape of mobile phones to make full use of battery casing space and upgrade batteries.Capacity.
7.Good discharge characteristics
The polymer battery uses a colloidal electrolyte, which has a smooth discharge characteristic and a higher discharge platform than a liquid electrolyte.
8.The protection board is simple in design
Due to the use of polymer materials, the battery core does not or explode, and the battery core itself has sufficient safety.Therefore, the protective circuit design of the polymer battery can be omitted by omitting the PTC and the fuse, thereby saving battery cost.
Lithium batteries are widely used in various fields: digital products, medical equipment, public equipment, communication equipment, automobiles, drones, etc.
Product Certificate:SGS Field certification,CE CB RoHS KC etc.
Main supply products:Li-ion battery ,li-polymer battery , LiFePO4 battery , 18650 battery , 3.7V to 72V battery pack , UPS , Power bank .Provide customized services!!
DATA POWER factory output exceeds 30,000 PCS battery, battery pack daily output is 10000PCS
We have long-term cooperation with more than 20 countries around the world to support cargo door-to-door service. Once we cooperate, we will continue to provide you with after-sales service.
FAQ:
1. Q: What's your MOQ(minimum order quantity) of Deep Cycle 24V 100ah LiFePO4 Lithium Battery Power Supply Solar Electric Vehicles UPS with BMS?
A: 100PCS.(Acceptance of sample orders for small trial orders)
2. Q: What's your packing methods ?
A: Industrial packing (can be as customer's requirements)
3. Q: What's your payment terms ?
A: T/T 30% in advance & T/T 70% upon sending the goods, L/C 100%, or negotiate according to the order status.
4. Q: What's your delivery time?
A: 4 weeks after received the advance payment or L/C.
5. Q: Can we visit your factory?
A: Warmly welcome. Once we have your schedule, we will arrange the professional sales team to follow up your case.
Please send us an email for more product details.!
Audited Supplier 
){kind=link}
){kind=link}